Installation Guide

5. Setting Up Windows Server 2008 (32-bit)
Express5800/T110f-S, R110f-1E Installation Guide (Windows)
220
Chapter 1 Installing Windows
9. Proceed application step according to the installation type.
Tips
During setup, a virtual floppy disk drive is temporarily connected. Follow the
instructions below to reference the virtual floppy disk drive.
Full installations
Click app_pkg.bat of Floppy disk drive (usually drive A).
Server Core installations
(1) Enter the following command at the command prompt, and then specify the drive letter of
Floppy disk drive (usually drive A).
Cd /d A:\
C:\Users\administrator>cd /d A:\
(2) Enter the following, and then press <Enter> key.
app_pkg.bat
A:\>app_pkg.bat
Wait until the file copy is complete. (About 1 to 3 minutes.)
On Full Installation, the following progress message appears while the Starter Pack is installed.
10. Read the message, and then click OK.
Starter Pack installation starts.
Wait until the installation of the Starter Pack is complete. (About 3 to 5 minutes)