Installation Guide

5. Setting Up Windows Server 2008 (32-bit)
Express5800/T110f-S, R110f-1E Installation Guide (Windows)
209
Chapter 1 Installing Windows
\001\win\winnt\oemfd\ws2008\megasas2
When using the N8103-171 RAID Controller:
\001\win\winnt\oemfd\ws2008\megasas2
When using the onboard RAID Controller (LSI Embedded MegaRAID) and a USB-DVD drive:
\001\win\winnt\oemfd\ws2008\megasr1
Tips
The driver does not have to be loaded at this time if it was loaded in steps 17 and
18.
25. Select the necessary driver from the driver list shown, and then click Next.
When using the N8103-149/150/151 RAID Controller:
[LSI MegaRAID SAS 9267-8i]
When using the N8103-152 RAID Controller:
[LSI MegaRAID SAS 9265CV-8i]
When using the N8103-171 RAID Controller:
[LSI MegaRAID SAS 9240-8i]
When using the onboard RAID Controller (LSI Embedded MegaRAID) and a USB-DVD drive
[LSI Embedded MegaRAID]
Tips
When N8103-152 is used, the name of the RAID Controller that appears on the
screen differs from the one shown on WebBIOS and Universal RAID Utility.
However, this is not a problem.
26. If you used EXPRESSBUILDER DVD, remove it and then insert the OS installation media.
27. Select the disk in which the partition will be created, and then click Drive options (advanced)
If a partition has already been created, go to step 30.
28. Click New, enter the partition size into the size input box, and then click Apply.
Note
When installing the OS to a disk of over 2,097,152 MB (2 TB), the partition size can
only be set to 2,097,152 MB or less.
29. Select the partition created in step 27, and then click Format.
30. In the window below, select the created partition, and then click Next.