Installation Guide

5. Setting Up Windows Server 2008 (32-bit)
Express5800/T110f-S, R110f-1E Installation Guide (Windows)
204
Chapter 1 Installing Windows
If you need to suspend setup due to reasons such as backing up data, restart the setup process from
the beginning.
12. Continue setup according to the on-screen messages.
When copying the OEM driver, the following message appears.
Insert the removable media into the disk drive, and then click Yes.
When the following screen appears, insert the OS installation media into the disk drive, and then click
OK.
13. The server reboots automatically.
If you use Internal Flash Memory, press <F3> key when the following message appears during POST.
Press <F2> Setup, <F3> Internal Flash Memory, <F4> ROM Utility, <F12> Network
Note
Since the OS installation media is set in the optical disk drive in Step 12, boot the
system from the optical disk drive having higher boot priority, not from Internal
Flash Memory.
14. Run from the OS installation media.
If a bootable operating system is already installed on the hard disk drive, press <Enter> key while the
message "Press any key to boot from CD or DVD…" is displayed on the top of the screen.
The boot sequence proceeds and the message "Windows is loading files…" appears.