Installation Guide

5. Setting Up Windows Server 2008 (32-bit)
Express5800/T110f-S, R110f-1E Installation Guide (Windows)
182
Chapter 1 Installing Windows
Use Custom:
(1) Click Custom.
(2) Use this menu to configure the RAID system with the RAID controller detected automatically.
Note
When using an onboard RAID controller (LSI Embedded MegaRAID):
This function does not support the creation of RAID10 by using the onboard RAID
controller. Refer to Chapter 2 (4. RAID System Configuration) in “Maintenance
Guide” when creating RAID10.
When creating new logical drives
With the Skip a RAID Configuration check box cleared, click Next. Set up the logical drives
according to the wizard.
Important
If you proceed with wizard, the existing RAID system is destructed and the
contents of hard disk drive will be erased.
When skipping the creation of new logical drives
Select the Skip a RAID Configuration check box, and then click Next.