Installation Guide

4. Setting Up Windows Server 2008 R2
Express5800/T110f-S, R110f-1E Installation Guide (Windows)
164
Chapter 1 Installing Windows
4.8
Installing the Applications
EXPRESSBUILDER contains applications including NEC ESMPRO Agent and NEC ESMPRO Manager. Some
applications stored in EXPRESSBUILDER can be installed collectively by performing the procedures described
below. When installing these applications individually, see Chapter 2 (Installing Bundled Software).
This feature is only available for Full installations.
1. Log on to the system with the built-in administrator, which has administrative privileges.
2. Insert the EXPRESSBUILDER DVD into the optical disk drive.
3. Click Integrated Installation on the menu.
4. On the following screen, make sure that the Applications option is selected.
Select the check boxes corresponding to the applications to install, and then click Install.
Note
• If Starter Pack is already installed, the Applications option is selected by
default.
• Applications available for installation are selected by default.
• An application that has been already installed need to be uninstalled before
installing it again.
• If your system environment does not satisfy the prerequisite for an application,
you cannot install it. (For details, refer to the on-screen information and the
relevant page of each application.)