User Guide

BMC Configuration User's Guide
37
Item Description Default Value
Non- Aggressive Mode
(Non-Critical Power Cap)
Non-Aggressive Mode brings the system power
consumption under the specified upper limit threshold
without extremely decreasing system performance.
This function reduces power consumption by changing
only CPU clock in order to reduce the deterioration of
the system performance compared with Aggressive
Mode. If the power consumption has been exceeded
over the Power Threshold(Pn) during the period
specified in the Correction time limit, it will be able to
generate System Event Log and send alert.
Non-Aggressive Mode
(Non-Critical Power Cap)
Select Enable/Disable of Non-Aggressive Mode. Disable
Power Threshold(Pn)
(Power Cap Value(Pn))
Set the Power consumption upper limit threshold of
Non-Aggressive Mode. The range is from Minimum
Configuration of Idle to BBB.[Watt] *4 *5 *8
Power
Threshold(Pa) -
10 or Minimum
Configuration
of Idle + 10,
whichever is
greater. [*8]
Correction time limit Set the maximum time to take corrective actions in
order to bring the system power consumption back to
the specified Power Threshold(Pn) before generating
System Event Log and sending alert. The range is
from 1 to 600.[Sec] *4 *8
10 or Minimum
value,
whichever is
greater. [*8]
Safe Power Capping Safe Power Capping brings the system power
consumption down forcibly when the system is unable
to obtain the power readings. This function is
considered for the case where the sharp increase of
power consumption causes circuit breaker tripping
while the system power consumption is not readable.
Safe Power Capping
(Power Reading Timeout)
Select Enable/Disable of Safe Power Capping. Disable
Boot Time Configuration *6 Boot Time Configuration can set the performance of
the system in booting. Also can set disable CPU cores
per sockets.
Boot Time Configuration Select Enable/Disable of Boot Time Configuration. Disable
Performance Mode Select the performance of the system in booting. *7
Performance Optimized
Power Optimized
Performance
Optimized
Disable CPU Cores Set the CPU Core number(s) to disable. *7 *8 0
ECO Info. The reference value and the statistics value of the
managed server are displayed.
*1: It is possible to set when Aggressive Mode is "Enable".
*2: AAA is Minimum Configuration of Idle or "Power Threshold(Pn)".
*3: When Power Threshold(Pa) is not equal to Power Threshold(Pn), NNN is "1". When Power
Threshold(Pa) is equal to Power Threshold(Pn), NNN is "Correction time limit" of Non-Aggressive Mode.
*4: It is possible to set when Non-Aggressive Mode is "Enable".
*5: BBB is Maximum Configuration of During Operation or "Power Threshold(Pa)".
*6: It is not displayed when the system does not support this function.
*7: It is possible to set when Boot Time Configuration is "Enable".
*8: The range and value is different according to the system.
IMPORTANT:
 The ECO screen is not displayed if the managed server does not support this function.