User Guide

1. Installing Internal Optional Devices

Express5800/R110f-1E User’s Guide

Chapter 2 Preparations

1.15.2

Removal

Remove a Hard Disk Drive in the following procedure.

Important

If you dispose of the removed hard disk drive, follow instructions

described in Chapter 1 (1. Transfer, Movement, and Disposal) in

“Maintenance Guide”.

Note

If you have to remove a failed hard disk drive, check the bay with its DISK

LED lit amber.

1. Refer to Chapter 2 (1.3 Overview of Installation and Removal) for preparations.

2. Push the lever to unlock and open the

handle.

3. Hold the handle and tray firmly and pull

the Hard Disk Drive out.

4. If you intend to use the server with the

Hard Disk Drive removed, fill the open

bay with the dummy tray.

Note

Do not pull the handle to remove the hard disk drive.

Doing so may damage the handle.

5. Turn on the server, start the SETUP utility, and then specify the boot order from the Boot menu. For

details about the Boot menu, refer to Chapter 2 (1.2.5 Boot) in "Maintenance Guide".

6. Refer to Chapter 2 (1.20 Attaching the Front Bezel) to put the front bezel back.

DISK LED