User Guide

1. Installing Internal Optional Devices
Express5800/R110f-1E User’s Guide
89
Chapter 2 Preparations
1.13
Optical Disk Drive
This section describes the procedure for installing the optional optical disk drive.
Important Do not install any unsupported optical disk drive.
1.13.1
Installation
Install an optical disk drive in the following procedure.
(a) 3.5-inch drive model
1. Refer to Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. Refer to Chapter 2 (1.6 Removing the Top Cover) to remove the top cover.
3. Unscrew one of the screws securing the
bracket of the optical disk drive and
remove the optical disk drive cover.
Important
Keep the screw and dummy tray in the optical disk drive for future use.
4. Install the optical disk drive.
5. Screw the bracket you removed in step 2
to secure the optical disk drive in place.
6. Put the removed components.
Optical disk drive bay