User's Manual

NEC ESMPRO Manager Ver.5 Command Line Interface
60
2.2.49 getBladeSlotId
Syntax:
dscli getBladeSlotId Component
Description:
Execute 2.2.41 getIpmiInfo command previously.
Obtains enclosure ID and slot ID of a managed component if the managed server is a blade. The enclosure ID
is for identifying the blade assembly unit where the blade is installed. The slot ID shows the installation
position inside the blade assembly unit where the slot is installed.
Options:
Component
Specify the name, the MAC address of LAN port that BMC uses, or the GUID of the managed
component..
Output:
Displays enclosure ID and slot ID. The following shows an example.
Enclosure ID: 0040000000
Slot ID: 2
2.2.50 setBmcIpAddressLan1
Syntax:
dscli setBmcIpAddressLan1 Component IpAddress [/force]
Description:
Changes the LAN1 IP address for BMC on the managed component.
Options:
Component
Specify the name, the MAC address of LAN port that BMC uses, or the GUID of the managed
component.
IpAddress
Specify the IP address of LAN1 for BMC.
/force
If the managed component contains BMC that uses a standard LAN port, specify "/force" option to
change IP address for BMC while the operating system is running.
TIP:
 The IP address that is already registered cannot be specified to IpAddress.