User's Manual

NEC ESMPRO Manager Ver.5 Command Line Interface
48
2.2.28 getAgentExtensionLog
Syntax:
dscli getAgentExtensionLog Component
Description:
Obtains the application logs of the NEC ESMPRO Agent Extension on a managed component. This
command can be used via LAN when NEC ESMPRO Agent Extension service is running on the managed
component.
Options:
Component
Specify the name, the MAC address of LAN port that BMC uses, or the GUID of the managed
component.
Output:
Displays the application logs of the NEC ESMPRO Agent Extension.
2.2.29 testAlert
Syntax:
dscli testAlert Component Target
Description:
Executes an alert test.
You can confirm the result of test using 2.2.30 getTestAlertStatus command. The parameter supported
according t
o the kind of BMC is different.
Options:
Component
Specify the name, the MAC address of LAN port that BMC uses, or the GUID of the managed
component.
Target
Specify an alert receiver.
LAN1_1 or 0: LAN1 alert receiver (1)
LAN1_2 or 1: LAN1 alert receiver (2)
LAN1_3 or 2: LAN1 alert receiver (3)
LAN2_1 or 3: LAN2 alert receiver (1)
LAN2_2 or 4: LAN2 alert receiver (2)
LAN2_3 or 5: LAN2 alert receiver (3)
PPP1_1 or 6: PPP1 alert receiver (1)
PPP1_2 or 7: PPP1 alert receiver (2)
PPP1_3 or 8: PPP1 alert receiver (3)
PPP2_1 or 9: PPP2 alert receiver (1)
PPP2_2 or 10: PPP2 alert receiver (2)
PPP2_3 or 11: PPP2 alert receiver (3)
Pager1 or 12: Pager alert receiver (1)
Pager2 or 13: Pager alert receiver (2)
SNMP1 or 14: SNMP alert receiver (1)
SNMP2 or 15: SNMP alert receiver (2)
SNMP3 or 16: SNMP alert receiver (3)