User's Manual

NEC ESMPRO Manager Ver.5 Command Line Interface
35
LAST_STATE If the managed component is OFF when AC power is lost, the managed component
remains OFF when AC power is restored.
If the managed component is turned AC OFF during it is in DC ON, the managed
component is turned DC ON after the delay time when it is turned AC ON.
POWER_ON The managed component is turned DC ON after the delay time when it is turned AC
ON.
2.2.22 getPowerRestoreDelay
Syntax:
dscli getPowerRestoreDelay Component
Description:
Obtains power option that specifies working of a managed component when it is turned AC ON.
For details, see 2.2.21 setPowerRestoreDelay.
Opti
ons:
Component
Specify the name, the MAC address of LAN port that BMC uses, or the GUID of the managed
component.
Output:
Display power option information. The following shows an example.
POLICY : LAST_STATE
Power Restore Delay : 30 sec
Power Restore Delay(default) : 0 sec
2.2.23 setBmcInfo
Syntax:
dscli setBmcInfo Component KeyName Value
Description:
Changes BMC configuration information on the managed component. The parameter supported according to
the kind of BMC is different.
TIP:
 Use setAuthKey command to change authentication key or password of PPP server. See
2.2.25 setAuthKey.
 Use set
SensorLevel command to change separate sensor level. See 2.2.26 setSensorLevel.
 C
FG_NETWORK_SHARED_BMC_LAN,CFG_NETWORK_BMC_MAC is not change.
Use getBmcInfo command. See 2.2.24 getBmcInfo.
Options:
Component
Specify the name, the MAC address of LAN port that BMC uses, or the GUID of the managed
component.
KeyName
Specify the key name of BMC configuration. See the following list.
Value
Specify the new values to be set. See the following list.