User's Manual

NEC ESMPRO Manager Ver.5 Command Line Interface
34
2.2.20 getShutdownPolicy
Syntax:
dscli getShutdownPolicy Component
Description:
Obtains shutdown policy of NEC ESMPRO Agent Extension on a managed component.
This command can be used via LAN when NEC ESMPRO Agent Extension service is running on the
managed component.
Options:
Component
Specify the name, the MAC address of LAN port that BMC uses, or the GUID of the managed
component.
Output:
Displays shutdown policy. For details, see 2.2.19.
The following shows
an example.
SCH_ACLINK_STAYON_ENABLE=0
SCH_AC_LINK=1
SCH_DC_OFF_ENABLE=1
SCH_DC_OFF_DELAY=10
SCH_SHUTDOWN_ENABLE=1
SCH_SHUTDOWN_WAIT=60
2.2.21 setPowerRestoreDelay
Syntax:
dscli setPowerRestoreDelay Component DelayTime [/x Policy]
Description:
Changes the power option that specifies working of a managed component when it is turned AC ON.
The power option includes AC-LINK policy and the time that delays Power ON (DC ON) when the managed
component is set to be turned DC ON in time with AC ON.
IMPORTANT:
 In case that the managed component does not support a setting of power restore delay, This
command is invalid. See “NEC ESMPRO Manager Managed Components Summary”
whether the managed component supports the function.
Options:
Component
Specify the name, the MAC address of LAN port that BMC uses, or the GUID of the managed
component.
DelayTime
Specify delay time in the range 0-600 seconds. When -1 is specified, the delay time is not changed.
/x Policy
Sets AC-Link Policy. No change is made if omitted There are 3 types of the policy.
STAY_OFF The managed component remains OFF when AC power is restored.