User's Manual

NEC ESMPRO Manager Ver.5 Command Line Interface
29
setServerProperty command.
Output:
Di
splays the specified property of a managed component.
2.2.14 getServerInfo
Syntax:
dscli getComponentInfo Component
Description:
Displays the managed component information that includes main component properties.
Options:
Component
Specify the name, the MAC address of LAN port that BMC uses, or the GUID of the managed
component.
Output:
Displays the managed component information. The following information is shown:
Item Name Contents
Component Name Name of the managed component
Alias Alias of the managed component
Group Name of the group that the managed component belongs to.
Connection Type Connection type between the managed component and the NEC ESMPRO
Manager component.
BMC Control Display BMC management status
Enable : management is valid
Disable : managemant is invalid
Not Registered : not registered for management
Not Support : out of management (BMC is not integrated)
Check Connection Display “Completed” if the Check connection has been executed.
BMC Current IP Address Current BMC IP address to connect to the managed component via LAN.
Failover Determine whether to enable/disable the Fail over function that continues
communication by changing to the other IP address if communication with the
current BMC IP address encounters an error.
BMC LAN1 IP Address BMC IP address to connect to the managed component via LAN.
BMC LAN1 Subnet Mask Subnet mask of the BMC IP address
BMC LAN2 IP Address Extra BMC IP address to connect to the managed component via LAN.
BMC LAN2 Subnet Mask Subnet mask of the extra BMC IP address
Phone Number Phone number of the managed component
Product Name Product name of the managed component
Serial Number Serial number of the managed component
GUID ID for identifying the managed component
IPMI Version IPMI version that the managed component supports
Remote KVM and
Media License
State of "Remote KVM and Media License" of the managed component. If this
managed component does not contain EXPRESSSCOPE Engine series, this
item is not shown. See 2.1.14”getGroupRemoteKvmLicense” for details.
Chassis Name Name of chassis in which the managed component is installed. This item is
shown If the managed component is CPU blade or switch blade.
Slot Number Slot number of the blade slot in which the managed component is installed.
This item is shown If the managed component is CPU blade or switch blade.
Blade Width Blade width with the occupied slot count. This item is shown If the managed
component is CPU blade or switch blade.