User's Manual

NEC ESMPRO Manager Ver.5 Command Line Interface
14
2.1.7 getGroupStatus
Syntax:
dscli getGroupStatus GroupName
Description:
Displays the status of a specified component group. Among all component condition under the group,
displays the worst condition as a status of the group.
Confirms the condition of component by component monitoring function.
Options:
GroupName
Specify the name of group.
Output:
Displays the status of the specified component group. There are following types of status.
ERROR Error
WARNING Warning
UNKNOWN Unknown or connection error
DC-OFF DC-OFF
NORMAL Normal
NO_MONITORING Out of monitoring
2.1.8 groupPowerOn
Syntax:
dscli groupPowerOn GroupName [/p] [/exs ComponentName1 ComponentName2 ...
ComponentNameN] [/exg GroupName1 GroupName2 ... GroupNameN]
Description:
Turns on all managed components in a specified group.
The managed components in the sub-group are also controlled.
IMPORTANT:
 In case that the managed component does not support a force network-boot function which
boots the component from network regardless of boot order, a force network-boot function
cannot be executed. See “NEC ESMPRO Manager Managed Components Summary”
whether the managed component supports function.
CHECK:
 This command is not executed for the PowerBay, the EM card, and the switch blade.
Options:
GroupName
Specify the name of group.
If you want to control all the components under root, specify “root”.
/p
Force boot from network after the power is turned on.