Setup Guide

NEC ESMPRO Manager Ver.5 Setup Guide
9
1.2 Configure BMC on Managed Component
Configure BMC of the managed component at first.
TIPS:
 This section explains about the minimum setting that is necessary to connect NEC
ESMPRO Manager with the managed component. For details of BMC configuration, see
document of each tool.
There are three methods for configuring the BMC on a managed component for LAN connection.
 Configuration with NEC EXPRESSSCOPE ENGINE 3 WebConsole
You can access EXPRESSSCOPE ENGINE 3 from Web a browser, and set the BMC Configuration
information.
CHECK:
 You can use EXPRESSSCOPE ENGINE3 only when the HTTP/HTTPS is set to enable.
 Configuration with online BMC Configuration.
Online BMC Configuration tool installed on Windows/Linux OS sets BMC Configuration.
 Configuration with off-line BMC Configuration.
Off-line BMC Configuration started from POST screen by F4 key sets BMC Configuration.