Setup Guide

NEC ESMPRO Manager Ver.5 Setup Guide
86
(5) Click “Connection Setting” from “Sever setting” on “Sever Setting Navigation” tree and click
“Connection”.
(6) Click “Check Connection”.
NEC ESMPRO Manager will communicate with the BMC of the managed component to check the
connection. The NEC ESMPRO Manager will also collect the component information for the
management.
When the “Check Connection” is completed, the NEC ESMPRO Manager can control the managed
component.
CHECK:
 After the operation for the managed component is finished, click “Disconnect” on the
“Connection Setting”.