Setup Guide

NEC ESMPRO Manager Ver.5 Setup Guide
80
Chapter3 Setup for the Managed Component
integrated BMC excluding EXPRESSSCOPE ENGINE 3
(for modem / direct connection)
This chapter explains the setup procedure for the NEC ESMPRO Manager to manage the BMC on a
managed component remotely via modem / direct connection.
Case of direct connection is explained on the center.
3.1 Setup Flow (for modem/direct connection)
Perform the following setup procedure:
(1) Connects the NEC ESMPRO Manager server and the managed component on the same on the network.
With direct connection, connect the NEC ESMPRO Manager server and the managed component directly
with RS-232C cross cable. The serial port of the NEC ESMPRO Manager server NEC ESMPRO Manager is
specified on the “Environment Setting” screen of the NEC ESMPRO Manager.
(2) Configure the BMC on the managed component.
(3) Register the managed component on the NEC ESMPRO Manager.