Setup Guide

NEC ESMPRO Manager Ver.5 Setup Guide
8
Chapter1 Setup for Managed Component integrated
EXPRESSSCOPE ENGINE 3
This chapter explains the setup procedure for the NEC ESMPRO Manager to manage the BMC and NEC
ESMPRO Agent Extension ver.2.xx on a managed component remotely via LAN connection.
1.1 Setup Flow
Setup by the following setup procedure:
(1) Connects the PC for management installed NEC ESMPRO Manager and the managed component on the
same network.
(2) Configure BMC on the managed component to enable ESMPRO Management.
(3) Register the managed component on NEC ESMPRO Manager.