Setup Guide

NEC ESMPRO Manager Ver.5 Setup Guide
57
2.2.2.5 Procedure to retry configuration with NEC ESMPRO Manager
PXE Service
After setting the configuration for the managed component, NEC ESMPRO Manager PXE Service records
the managed component on the computer information. When the managed component has been recorded
status “Completed” on the computer information, the NEC ESMPRO Manager component does not set the
configuration even though the managed component requires network-boot.
If “Auto Registration” function of NEC ESMPRO Manager cannot find the managed component configured
with the NEC ESMPRO Manager PXE service, Edit the computer information of the managed component
and then retry configuration.
The order is below.
(1) Click “Linkage Service” of “Tools” from the “header menu” on the NEC ESMPRO Manager. Click
MAC address of the managed component that cannot be found “Auto Registration” function of NEC
ESMPRO Manager.
(2) Change “Status” to “Not Processed” and click “Update”.
(3) Click “Apply” on the “Computer Information List” screen.
(4) Retry the configuration with NEC ESMPRO Manager PXE Service.
TIPS:
 You can also change the status on the computer information by using NEC ESMPRO
Manager PXE Service Management tool. To use the tool, start “NEC ESMPRO Manager
PXE Service Management” of the ” NEC ESMPRO Manager PXE Service” from start
menu of Windows on the NEC ESMPRO Manager server.