Setup Guide

NEC ESMPRO Manager Ver.5 Setup Guide
49
(6) Reboot the Operating System.
The NEC ESMPRO Manager PXE Service accepts a network-boot request from the managed component,
sets the following configuration items, and then reboots the Operating System.
-- “IP Address”:
The IP address assigned by the DHCP server is set.
-- “Computer Name”:
The managed component’s MAC address is registered with “PXE” prefixed.
TIPS:
 Other configuration items are set with values of the configuration information file. The
MAC addresses of the gateway and the alert receivers will be also set in the BMC.
(7) After the managed component has been network-booted, reboot again and change the boot priority back
to original using the BIOS Setup Utility.
See 2.2.2.4 ”How to confirm the status of the network-boot procedure by NEC ESMPRO Manager PXE
Service”.
(8)
Click NEC ESMPRO Manager “Linkage Service” from “Tools” to display the “PXE Service” screen,
and stop the NEC ESMPRO Manager PXE Service.