Setup Guide

NEC ESMPRO Manager Ver.5 Setup Guide
48
(3) To register the configuration information file, open the “Configuration Information” screen of “Linkage
Service” from “Tools” on the NEC ESMPRO Manager. Specify the path name of the configuration
information file, and click “Register”.
TIPS:
 You can also register the configuration information file on the NEC ESMPRO Manager
PXE Service by using NEC ESMPRO Manager PXE Service Management tool. To use the
tool, start “NEC ESMPRO Manager PXE Service Management” of the
”NEC ESMPRO Manager PXE Service” from start menu of Windows on the NEC
ESMPRO Manager server.
(4) Change the boot device priority so that the highest priority will be given to network-boot devices, using
the managed component’s BIOS Setup Utility.
TIPS:
 If the managed component is Blade Server, the network-boot is initially set with the highest
priority.
(5) If you set “Default Gateway” at creating the configuration information file, please connect the managed
component via LAN port used by BMC and the gateway to network.
If you set “Alert Receiver / Management PC IP Address” on same network with the managed component at
creating the configuration information file, please connect the managed component via LAN port used by
BMC and the alert receiver/management PC to network.