Setup Guide

NEC ESMPRO Manager Ver.5 Setup Guide
28
(5) Click "Connection Setting" from "Component Setting Navigation" tree of the managed component.
"Connection Setting" view is displayed.
NEC ESMPRO Manager will execute “Check Connection” and collect the component information for
the management.
When the “Check Connection” is completed, the NEC ESMPRO Manager can control the managed
component.
CHECK:
If you execute check connection with both SNMP management and "Management
Controller" management registered, the check connection will not complete in case either
specification is not correct.
If the check connection is not completed, try to set either SNMP management or
"Management Controller” management “unregistered”, and execute check connection again, the
check connection will be completed.