Setup Guide

NEC ESMPRO Manager Ver.5 Setup Guide
14
(3) “BMC Configuration” dialog box is displayed. Click “Miscellaneous” tab page.
Be sure to set the following items. The other items can be used with the default values.
-- “ESMPRO Management”
Click “Enable”.
-- “Authentication Key”
The following screen shows example.
CHECK:
 If a managed component supports SOL and “Redirection” is selected to “Enable”, you must
change the following items for the remote console via the LAN.
Main dialog box – “Set BIOS Configuration” page – “Flow Control”: Hardware
RTS/CTS