User's Guide

1. Installing Internal Optional Devices

Express5800/R110d-1E, E110d-1 User’s Guide

Chapter 2 Preparations

1.14.2

Removal

Remove a Hard Disk Drive in the following procedure.

Important

Data on Hard Disk Drives

You are responsible for erasing sensitive data including customer

information or financial information of your company stored in the

removed Hard Disk Drives so that such data will not be disclosed to a third

party. The data seems to be erased using the "Empty the recycle bin"

operation in Windows or the format command of the OS, but the actual

data remains in the Hard Disk Drives. Data which is not yet completely

erased can be recovered by using special software and reused by

unauthorized parties.

To avoid such problems, it is strongly recommended that you use

commercial software or services to securely erase data. For information

on erasing data, contact the store where you purchased the product or

your maintenance service company.

Note

If you have to remove a disk due to a Hard Disk Drive failure, check the slot with

its DISK LED lit in amber.

1. Refer to Chapter 2 (1.3 Overview of Installation and Removal) for preparations.

2. Push the lever to unlock and open the

handle.

3. Hold the drive carrier firmly and pull out

the Hard Disk Drive.

4. If you intend to use the server while the

Hard Disk Drive is removed, fill the open

slot with a dummy tray.

Note

Do not pull the slot out from the handle. Doing so may damage the handle.

DISK LED