User's Guide

1. Installing Internal Optional Devices
Express5800/R110d-1E, E110d-1 User’s Guide
74
Chapter 2 Preparations
7. Insert the riser card into the slot of the
motherboard and fix the riser card with
the screw which you removed in step 4.
Position the terminal part of the riser
card in the slot of the motherboard and
then securely insert it.
8. Unscrew the battery bracket securing
the battery.
9. Write down the installation date (year
and month) on the SET UP DATE
LABEL and attach it to the position
shown in the image on the right.
10. Using the image on the right as a
reference, connect the battery cable to
the battery pack.
When connecting the cable, check the
orientation of the connector and connect
straight. Refer to the image on the right
to determine the correct direction of the
connector.
Blue line
comes on
the left
With battery bracket facing up
Write the date.
Example: Y 2007. M 12