User's Guide

1. Installing Internal Optional Devices
Express5800/R110d-1E, E110d-1 User’s Guide
73
Chapter 2 Preparations
1.10.3
Installing N8103-140 extra battery (for N8103-128/134/135)
This section describes the procedure of installing an extra battery for RAID Controller.
1. Refer to Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. Refer to Chapter 2 (1.6 Removing the Top Cover) to remove the top cover.
3. Remove the RAID Controller and attach
the battery connector board that comes
with the extra battery to the RAID
Controller.
4. Remove the screw securing the riser
card. Hold the both sides of the card and
lift it straight off the server.
5. Remove the screw from the riser card
and remove the slot cover.
6. Attach the RAID Controller to the rise
card.
PCIe#1
Low profile side
PCIe#2
Low profile side