User's Guide

1. Installing Internal Optional Devices
Express5800/R110d-1E, E110d-1 User’s Guide
65
Chapter 2 Preparations
If using the on-board controller for 2.5-inch models (1 to 4 units)
Motherboard Hard Disk Drive Backplane
SATA 0 SLOT 0 SATA 0
SATA 1 SLOT 1 SATA 1
SATA 2 SLOT 2 SATA 2
SATA 3 SLOT 3 SATA 3
Marked with
a bold line
Orient the cable so that the first pin of the cable (marked with
Δ
)
will connect to the first pin of the SGPIO1 connector (marked
with a bold line) on the backplane.
SGPIO1 connector
SGPIO connector
Serial ATA connector
Orient the cable so that the first pin of the cable (marked with
Δ
)
will connect to the first pin of the SGPIO1 connector (marked
with a bold line) on the motherboard.
Marked with
a bold line