User's Guide

1. Installing Internal Optional Devices
Express5800/R110d-1E, E110d-1 User’s Guide
59
Chapter 2 Preparations
Motherboard
SWRAID jumpers
321
3 2 1
Disabled Enabled
Backplane for 3.5-inch Hard Disk Drive
Backplane for 2.5-inch Hard Disk Drive
* The images above show the rear view of each backplane
(a) When using on-board RAID Controllers (LSI Embedded MegaRAID
TM
)
By changing the jumper setting for RAID configuration on the motherboard, the internal Hard Disk Drive can
be recognized as a software-controlled RAID System Hard Disk Drive.
Jumper settings on the motherboard and backplane
Change the jumper pin settings as described below.
Jumper pins on motherboard (SWRAID)
Enabled: 2-3 / Disabled: 1-2 (Default value)
Onboard SATA
controller
Onboard SATA
controller