User's Guide

3. Standard Features
Chapter 1 General Description
3.1
Management Features
The hardware components of the server provide operation control/reliability features as shown below.
Additionally, NEC ESMPRO Agent, which is provided in EXPRESSBUILDER, enables you to collectively
manage the state of your systems. You can also monitor the server states from a PC to manage the network
where NEC ESMPRO Manager provided in EXPRESSBUILDER is installed.
The features available on this server are as show
n in the table below.
Function Availability Description
Shows physical hardware information.
Memory bank
{
Shows physical memory information.
Device info
{
Shows information specific to the server.
Hardware
CPU
{
Shows physical CPU information.
System
{
Shows logical CPU information and monitors the load factor.
Shows logical m
emory information and monitors the status.
I/O device
{
Shows information on I/O devices (floppy disk drive, serial ports,
parallel ports, keyboa
rd, mouse, and video).
Monitors temperatures, fans, voltage, power supply, doors, and others.
Temperature
{
Monitors the temperature inside of the chassis.
System
environment
Fan Monitors the fans.
{
Voltage Monitors the voltage inside of the chassis.
{
Power supply Monitors the power supply unit.
{
Monitors chassis intrusion (open/close of the covers and doors on the
chassis).
Door
×
Software Shows service, driver, and OS information.
{
Network Shows network (LAN) information and monitors packets.
{
BIOS Shows BIOS information.
{
Local polling Monitors the values of MIB items obtained by NEC ESMPRO Agent.
{
Storage Monitors controllers and storage devices including Hard Disk Drives.
{
File system Shows the file system configuration and monitors the free space.
{
Monitors the following RAID Controllers:
• On-board RAID Controller (LSI Embedded MegaRAID
RAID System/Disk Array
{
TM
)
• Optional RAID Controller (N8103-128/129/130/134/135)
{
Monitors OS stall using the Watch Dog Timer.
Others*
Performs alert processing after an OS STOP error occurs.
{
{: Supported. U: Partially supported. ×: Unsupported.
*: Not displayed on the NEC ESMPRO Manager screen.
Tips
NEC ESMPRO Manager and NEC ESMPRO Agent are supplied with the server as
standard. For how to install and use each software component, refer to the
explanation of the component.
Express5800/R110d-1E, E110d-1 User’s Guide
29