User's Guide

2. Ideal Location and Connection
Express5800/R110d-1E, E110d-1 User’s Guide
101
Chapter 2 Preparations
(1) Installation
This server can be mounted to a rack made by NEC or other companies. Mount the server to a rack in the
following procedure.
• Preparation for mounting
The left and right slide rails are fixed with tape at the front and side faces to prevent falling off during
transportation. Remove the tape before mounting it to the rack.
Removing rail assemblies
1. Remove the sliding rails from left and
right sides of the server.
2. While pressing the unlock button at the
front of the server, hold the rail and
slowly slide it backward.
3. After removing the rail assemblies, only
the inner rail is screwed to the server.
Important
• The rail assemblies removed is used later in the subsequent procedure
(Installing rail assemblies).
• Be careful not to get your finger caught in the rail.
Inner rail
Press the button
to
u
nl
oc
k