User's Guide

- 47-
4. Networking
TCP/IP PORTS
The BMC uses the TCP/IP ports listed below. If you use the BMC in a firewall environment,
you need to allocate the port numbers (shown in the right column) to the individual non-block
ports.
Module name Port # Protocol Direction Module name Port #
Remote Media
(Non-Encryption)
Dynamic(*1) TCP

BMC 5120(CD/DVD)
5122(USB MEM)
5123(FD) (*2)
Remote Media
(Encryption)
Dynamic(*1) TCP

BMC 5124(CD/DVD)
5126(USB MEM)
5127(FD) (*2)
Web browser
(Non-Encryption)
Dynamic(*1) TCP

BMC 80(*3)
Web browser
(Encryption)
Dynamic(*1) TCP

BMC 443(*3)
Remote KVM Console
(Non-Encryption)
Dynamic(*1) TCP

BMC 7578(*2)
Remote KVM Console
(Encryption)
Dynamic(*1) TCP

BMC 7582(*2)
SSH client Dynamic(*1) TCP

BMC 22(*3)
SMTP server 25(*4) TCP

BMC Dynamic
LDAP server 389(*5)(*6) TCP

BMC Dynamic
SNMP server 162 UDP

BMC Dynamic
*1 The Dynamic ports are dynamically allocated ports and usually ranged from 1024 to
65535.
*2 Go to [Configuration]-[System Operation] to change the port number.
*3 Go to [Configuration]-[Network]-[Service] to change the port number.
*4 Go to [Configuration]-[Alert:]-[Mail Alert] to change the port number.
*5 If use TLS/SSL, default port number is 636.
*6 Go to [Configuration]-[User Management]-[LDAP] to change the port number.
BMC doesn't support connection via HTTP proxy server.