Installation Guide

4. Setting Up Windows Server 2008
Chapter 1 Installing Windows
If using Internal Flash Memory
:
When using the N8103-129/130 RAID Controller
 Windows Server 2008 64-bit Edition
Internal Flash Memory drive letter:\020\win\winnt\oemfd\ws2008x64\megasas2
 Windows Server 2008 32-bit Edition
Internal Flash Memory drive letter:\020\win\winnt\oemfd\ws2008\megasas2
When using the N8103-128/G128/134 RAID Controller
 Windows Server 2008 64-bit Edition
Internal Flash Memory drive letter:\020\win\winnt\oemfd\ws2008x64\stexstpt
 Windows Server 2008 32-bit Edition
Internal Flash Memory drive letter:\020\win\winnt\oemfd\ws2008\stexstpt
If using an onboard RAID Controller (LSI Embedded MegaRAID) in an environment containing the
DVD drive with USB connection
 Windows Server 2008 64-bit Edition
Internal Flash Memory drive letter:\020\win\winnt\oemfd\ws2008x64\megasr1
 Windows Server 2008 32-bit Edition
Internal Flash Memory drive letter:\020\win\winnt\oemfd\ws2008\megasr1
Tips
 The driver does not have to be loaded at this time if it was loaded in steps 10 and
11.
 The volume label of the Internal Flash Memory is INTER-FLASH.
18. Select the necessary driver from the driver list shown, and then click [Next].
 When using an N8103-129/130 RAID Controller
[LSI MegaRAID SAS 9264-8i]
 When using an N8103-128/G128/134 RAID Controller
[Promise SuperTrak SAS 6G RAID Controller]
 If using an onboard RAID Controller (LSI Embedded MegaRAID) in an environment containing the
DVD drive with USB connection
[LSI Embedded MegaRAID]
19. If you used the EXPRESSBUILDER DVD, remove it and then insert the OS installation media.
20. Select the disk in which the partition will be created, and then click Drive options (advanced).
Important
If a partition has already been created, go to step 23.
21. Click [New], enter the partition size into the size input box, and then click [Apply].
Important
When installing the OS to a disk of over 2,097,152 MB (2 TB), the partition
size can only be set to 2,097,152 MB or less.
22. Select the partition created in step 21, and then click [Format].
Express5800/GT-110d, GT-110d-S, R110d-1E, E110d-1 Installation Guide (Windows)
113