Installation Guide

71
Auto Registration
EM Card Monitoring
NEC ESMPRO Manager 47117(*1)
UDP
->
<-
623 EM Card
BMC configuration of CP
U blade
NEC ESMPRO Manager 47117(*1)
UDP
->
<-
623 EM Card
Operation with
Command Line I/F
NEC ESMPRO Manager 47117(*1)
UDP
->
<-
623 EM Card
SNMP Trap NEC ESMPRO Manager 162
UDP
<-
Unknow
n
EM Card
Ack sending for SNMP tr
ap
NEC ESMPRO Manager Unknown
UDP
->
5002 EM Card
*1 The NEC ESMPRO Manager uses a same port number for communication with BMC and EM card. The port numbe
r
can be changed on the [Environment] screen.
*2 The module uses the lowest unused port of the range.
[Management PC <-> Other Vendor's Management Console]
Management PC
Other Vendor's Management
Console
Function
Component Port No.
Protocol
/direction
Port
No.
Component
SNMP Trap Redirection NEC ESMPRO Manager Unknown
UDP
->
162
Other Vendor's Mana
gement Console
[Inside of the Management PC]
Function Component Port No.
Protocol
/direction
Port No. Component
NEC ESMPRO Manager NEC ESMPRO Manager
1099
51099-
51107
(*1)
UDP
->
<-
1099
51099-
51107
(*1)
NEC ESMPRO Manager
NEC ESMPRO Manager NEC ESMPRO Manager
8105
8109
TCP
->
<-
8105
8109
NEC ESMPRO Manager
NEC ESMPRO Manager Unknown
TCP
->
<-
47160-
47169
NEC ESMPRO Manager
PXE Service
BMC Configuration with N
EC ESMPRO Manager P
XE Service
NEC ESMPRO Manager
PXE Service
31200
UDP
->
<-
31200
NEC ESMPRO Manager
PXE Service
NEC ESMPRO Manager
Direct connection / Mo de
m connection
NEC ESMPRO Manager Unknown
TCP
->
<-
47140-
47149(*1)
NEC ESMPRO Manager
(DianaScope Modem Ag
ent)
*1 The module uses the lowest unused port of the range.
[Applications run on the Management PC]
Function Component Port No.
Protocol
/direction
Port
No.
Component
Inter-Manager
Communication
ESM Base Service Unknown
TCP
->
<-
8806 ESM Base Service
Alert Viewer Alert Viewer Unknown
TCP
->
<-
8807(*1) ESM Alert Service
*1 You can change the port number from [Tools] - [Port Settings] of AlertViewer.
Adding a Firewall exception is not needed.