Installation Guide

55
♦The end of the network-boot procedure of NEC ESMPRO Manager PXE Service
Do not operate the destination serv er until net work-boot procedure of NEC ESMPRO Manager PXE Service c
ompletes. When you have some operation before that, the NEC ES MPRO Manager PXE Service cannot be s t
opped from th e NEC ESMP RO Manager.
For completion of th e network boot, see "2.2.2.4 How to confirm the status of t he network-boot procedure by
NEC ESMPRO Manager PXE Service" in "NEC ESMP RO Manager Ver.5 Setup G uide".
♦Setting a Windows Firewall
If the Windows Firewall is e nabled on the management PC, NEC ESMPRO Manager PXE Service ma y not b
e executed BMC configuration.
In such a c ase, open the fo llowing ports on the ma nagement PC:
[Target ports]
Name
(Can be changed)
Port number Protocol
An arbitrary name 67 UDP
An arbitrary name 69 UDP
An arbitrary name 4011 UDP
An arbitrary name 31200 UDP