Installation Guide

♦Display of the network speed

 When you monitor Linux servers, S peed will not be displayed on the Network General view of th e [Inform

ation of server state]. In such a cas e, check it on the monitored server.

 When you monitor Windows servers which have network interfaces of which speeds are 10Gbps or ove r,

Speed may not be displayed correctly on the Network General view of the [Information of server state]. In

such a c ase, check it on the mo nitored servers.

 When you monitor Windows Server 2008 servers which have network interfaces with which a cable is not

connected, an incorrect value (4,294 Mbps) may be displayed for the Speed on the Network General vie

w of the [Information of server state].

♦Display of the network status

When you monitor a serv er with Windows Vista installed, the mes sage "Dormant" appears for S tatus on th e N

etwork General view of the [Information of server state] even if th e network properly works. In s uch a c ase, c

heck the network status on the monitored server.

♦Display of the teamed network interfaces

If network interfaces are te amed on a ser ver with Windows Vista / Win dows 7 /Windows Server 2008 / W indo

ws Server 2008 R2 installed, the network information may not be properly displayed on the [Information of ser

ver state]. Check it on th e monitored server

♦Coexistence of NEC ESMPRO Manager with HP OpenView Network Node Manager

(NNM)]

 To install NNM on th e environment where the N EC ESMPRO Manager has been installed, take the fol lowi

ng steps before installing NNM:

1. Select [Use S NMP Trap Service] from [Me thod of receiving SNMP Trap] displayed by clicking [SNMP

Trap Setting] of the AlertViewer.

When the message "Changes will take effect after the management computer has been restarted." a

ppears, exit the AlertV iewer and then take the follo wing steps without shutting do wn and rest arting t

he system:

2. Exit all applications related to NEC ESMP RO

3. Stop "NVBase System Service" (and other dependent services) by selecting [Administrative Tools] -

[Services] on t he operating system.

After the abov e, install NNM and r estart the comp uter.

 To install the NEC ESMPRO Manager on the e nvironment where NNM has b een installed, restart the com

puter after the installation of the NEC ES MPRO Manager completes.

Then, take the follo wing steps:

Select [Use SNMP Trap Service] from [Method of r eceiving SNMP Trap] displayed by clicking [SNMP Trap

Setting] of th e AlertViewer.

After the abov e, restart the computer