Installation Guide

 [Setting of Teaming for LAN that DianaScope Agent or NEC ESMPRO Agent Extension uses with th

e OS (providing redundancy or multiplexing with multiple network adapters) on the managed server

installed BMC that uses a Management LAN port]

If the teaming setting is ma de available for the LA N port that Diana Scope Agent uses on the managed s

erver installed BMC that uses a Management LAN port, see "Appendix B B.2 On the managed server tha

t BMC uses a Management LAN p ort" in "NEC ESMPRO Manager Ver.5 Setup Gu ide".

 Change of the hardware of a default gateway or an alert receiver

In case that there is a ga teway between a management PC and a managed server , re-configure BMC on

the m anaged server after the change the hardware of the gateway. In case that there is not gateway bet

ween an alert re ceiver and a managed server, re-configure BMC on the mana ged server after the change

the hardware of the a lert receiver. The BMC on the managed server can know MAC address of th e new

hardware by setting the B MC configuration.

 Use of a dialup router or a PPP server

If an alert rec eiver via modem uses Windows Remote Access Service, select "Allow any authentication inc

luding clear text" about the encryption on the Windows Remote Acces s Service properties.

 Restrictions on use of the standard serial port 2 (COM2)

If an alert rec eiver via modem uses Windows Remote Access Service, select "Allow any authentication inc

luding clear text" about the encryption on the Windows Remote Acces s Service properties.

- The managed server compatible with SOL and set enable on following BMC Configuration items:

"Remote control (WAN/Direct)"

"Redirection (LAN)"

"Redirection (WAN/Direct)"

- Connection via modem or direct connection has been made.

- Direct connection has been set in the BMC configuration information. (Even if the NEC ESMPRO Manager

and managed server are not connected, the BMC occupies the serial port 2 (COM2).)

See "Appendix C Managed Components Summary" in "NEC ESMPRO Manager Ver.5 Setup Guide" to

confirm whether that your server supports SOL.