Installation Guide

3.2 Managed server

A server to b e managed by NEC ESMPR O Manager is as foll ows:

 About the ma naged server integrated BMC (Baseboa rd Management Controller), see "Appendix C Manage

d Components Summary" in "NEC ESMP RO Manager Ver.5 Setup G uide".

The required environment varies dependi ng on the connection type with the mana ged server.

See "3.3 Requirements for Con nection between the Management PC and M anaged Server".

 If you use SNMP (Simple N etwork Management Protocol) monitoring function, the following software is ne

ed on managed server. (It is no matter if BMC is inte grated or not.)

- NEC ESMP RO Agent (Ver. 4.1 and above)

The following servers are not supported.

• NEC ESMPRO Agent for other vendor's server (up to Ver. 4.4)

• NEC Express5800/ft server

 If you use NEC ExpressUpdate function that manages versions of modules like firmware and software, the

following software or EXPRESSSCOPE Engine 3 is required on th e managed server.

- NEC E xpressUpdate Agent

 If you manage RAID system using Universal RAID Utility on the managed server, the following software is

required on the managed server.

- Universal RAID Utility (ver.2.1 and above)

If Windows Firewall is enabled, communication with NEC ExpressUpdate Agent or Universal RAID

Utility will be interrupted. To use NEC ExpressUpdate or manage RAID system with the Windows

Firewall enabled, see Appendix "Port numbers / Protocols" and open the required ports