User's Guide

The report contents include a detailed message, support method, and alert type.
The message can be edited and the report contents can be selected at the time of setting.
– Command execution function:
A specified command is executed.
Alert Manager can pass the specified command alert information as command line arguments.
– Client report function:
The report method can issue multicasting messages to the client computer in the same domain.
Report contents include a detailed message, support method, and alert type.
The report contents can be selected at the time of setting.
This function is only available for the Agent.
– Critical error logging function:
A critical error is written into a critical log.
A critical log is the log file in which a critical failure of the system is logged. A message to
attract the attention of the user is displayed when the setting is made in order to write the failure
into the critical log.
This function only supports the NvRAM placed server.
– Shutdown, reboot:
The system can be shut down and rebooted when the alert occurs. A time elapses before the
system shutdown can be specified.
This function is available for the Agent only.
NOTE: "Client report" method is not supported by Windows Vista and later.
Receive Function of Alert
2.3.3
– Receive Alert from Agent(TCP/IP) function:
This function receives the alert using the TCP/IP function.
This function is only available for the Manager.
9