User's Guide

Setting According to The Report Receiving Method

2.5.4

The [Receive] property sheet of the [Base Setting] dialog is used to select a method from a list and the

setting is made in the dialog displayed by pressing the [Configure] button.

To report the Alert, make settings by clicking the function status bitmap and change to green.

Setting of Alert Receiving from Agent (TCP/IP)

Make the setting as follows:

[Receive from Agent (TCP/IP) Setting] dialog is used to set and modify a socket receive.

 [Receive from Agent (TCP/IP) Setting] dialog

– [Port Number]:

Enter a port number used for socket receiving. This is not optional.

– [Default]:

To put the port number back to a default, press this button.

For this number, the same value must be set to the Agent and Manager (a default value is

31134 for both of Agent and remote Manager).

Do not change the value as long as the default value works.

– [OK]:

Set information is added and this dialog closes.

– [Cancel]:

This dialog closes with no set information added.