User's Guide

– [Port number]:

The port number used for the communication between sockets can be set.

For this number, the same value must be set to the Agent and remote Manager (the default

value is 31134 for both Agent and remote Manager).

Do not change the value as long as the default value works.

IMPORTANT: If the default value does not work, set the port number in the

range of 6001 to 65535.

Clicking the [Default] button resets the number to the default value (31134).

If a modification is made, be sure to also modify the setting for the remote

manager. This modification is made in the setting of TCP/IP receive in the

[Receive from Agent (TCP/IP) Setting] dialog of the base setting by executing the

Alert Manager setting tool on the server in which Manager is installed.

– [OK]:

Set information is added and this dialog box closes.

– [Cancel]:

This dialog box closes with no set information added.

– [Test]:

For the test report, press this button.

The test result can be checked by a message.