User's Guide

BMC Configuration User's Guide
23
Item Description Default Value
Mail Alert Mail Alert setting
Alert Select Enable/Disable of Mail Alert. Disable
Response time of SMTP
server
Set the timeout period until when the connection to
SMTP server succeed by E-mail transmission.
30
Mail Mail Header setting
To:1 Select Enable/Disable of To:1. *1 Enable
Mail Address Set the mail address of To:1. *2 *3 Blank
To:2 Select Enable/Disable of To:2. *1 Disable
Mail Address Set the mail address of To:2. *2 *3 Blank
To:3 Select Enable/Disable of To:3. *1 Disable
Mail Address Set the mail address of To:3. *2 *3 Blank
From Set the From. *3 Blank
Reply-To Set the Reply-To. *3 Blank
Subject Set the Subject. *4 Blank
SMTP Server SMTP Server setting
SMTP Server Set the SMTP Server. *5 0.0.0.0
SMTP Port Set the SMTP Port. 25
SMTP Authentication Select Enable/Disable of SMTP Authentication. Disable
CRAM-MD5 Select Enable/Disable of CRAM-MD5. *6 *7 Enable
LOGIN Select Enable/Disable of LOGIN. *6 *7 Enable
PLAIN Select Enable/Disable of PLAIN. *6 *7 Enable
User Name Set the SMTP User Name. *6 *8 Blank
Password Set the SMTP User Password. *6 *9 Blank
Alert Level Alert Level setting
Alert Level Set the kind of event to alert. *10 Error/ Warning
Alert Test Execute the alert test by E-mail.
*1: When Mail Alert is enabled, one or more of the addresses should be enabled.
*2: It is possible to set when To:X is "Enable".
*3: It is possible to set less than 255 half-size alphanumeric characters and "-(minus sign)", "_(underscore)",
".(period)", "@(at mark)".
*4: It is possible to set less than 63 half-size alphanumeric characters, except for "+", " "(quotation marks)",
"?", "=", "<" and ">".
*5: It is possible to set full domain or IP Address less than 255 half-size alphanumeric characters and
"-(minus sign)", "_(underscore)", ".(period)".
*6: It is possible to set when SMTP Authentication is "Enable".
*7: When SMTP Authentication is enabled, one or more of the authentic method should be enabled.
*8: It is possible to set less than 64 half-size alphanumeric characters, except for " (space)", " "(quotation
marks)", "?" , "=", "<" and ">".
*9: It is possible to set less than 19 half-size alphanumeric characters, except for " (space)", " "(quotation
marks)", "?" , "=", "<" and ">".
*10: The Alert Level is as follows:
Alert Level Description
Error When "Error" is detected in each sensor type, the alert is sent to the checked
address.
Error/ Warning When "Error" or "Warning" is detected in each sensor type, the alert is sent to
the checked address.
Error/ Warning/ Information When "Error", "Warning" or "Information" is detected in each sensor type, the
alert is sent to the checked address.