User's Guide

BMC Configuration User's Guide
19
Item Description Default Value
Management LAN Management LAN setting
Management
LAN
Set and display LAN port to communicate with BMC. You can
modify this setting only on BMC Configuration of Off-line
TOOL. *1 *2
Management LAN
: LAN port for BMC exclusive use.
Shared BMC LAN
: LAN port of System (OS) is shared and used.
Management LAN
Connection Type
Set and display the connection type of managed server. When
Management LAN is "Shared BMC LAN", you can modify this
setting only on BMC Configuration of Off-line TOOL
Auto Negotiation
: Connecting by suitable setting.
100Mbps Full
: Connecting by Full Duplex at speed of 100 Mbps.
100Mbps Half
: Connecting by Half Duplex at speed of 100 Mbps..
10Mbps Full
: Connecting by Full Duplex at speed of 10 Mbps.
10Mbps Half
: Connecting by Half Duplex at speed of 10 Mbps.
Auto Negotiation
MAC Address
MAC Address is displayed.
DHCP
Determine whether to dynamically obtain an IP address from a
DHCP server. If the item is set Enable and applied, BMC set the
value obtained from DHCP server on "IP Address", "Subnet
Mask" and "Default Gateway".
Blade Server:
Enable
Other server:
Disable
IP Address
Set the BMC IP address of the managed server.*4
192.168.1.1
Subnet Mask
Set the Subnet Mask of the managed server. *3 *4
255.255.255.0