Electronics America Server User Manual

Windows Setup 4-19
11. When the [Basic information] window
is displayed, confirm the information
and correct it if necessary. Then press
the ĺ key. (The “Target Machine”
information on the window differs
depending on the model.)
ĺ key: Used to move to the next
screen.
ĸ key: Used to return to the previous
screen.
ĹĻ key: Used to select a menu.
F1 key: Displays help.
ENTER key: Used to select [OK] or to decide each item.
ESC key: Used to select [Cancel].
IMPORTANT:
 Allocate the partition to install the OS in the size that is bigger than the required
minimum size. (See page 4-5.)
 If you select [Use Existing Partition] in [System Partition], information about
the first partition will be formatted and erased all. Information on other
partitions will be retained.
 If an existing hard disk drive partition that has been upgraded to the dynamic
disk remains, you cannot reinstall OS (refer to page 4-14). Do not select [Use
Existing Partition] in [System Partition].
 The file system of the system partition is fixed to be NTFS.
 When you select [Use Existing Partition] in [System Partition], if the partition
to be reused only exists (excluding the maintenance domain), reserve the
maximum disk space and install Windows Server 2003.
 You cannot move to the next window, if the contents that you have set are
incorrect.
 In Express Setup, you cannot specify the details of network adapter. Specify
them from Control Panel after starting Windows.
 Detailed setting of the network adapter is not supported by Express Setup. Set it
from Control Panel after starting Windows.
12. When the [User Information] window
is displayed, confirm the settings and
move to the next screens. Correct the
settings if necessary. Then press the ĺ
key.
ĺ key: Used to move to the next
screen.
ĸ key: Used to return to the previous screen.
United States
User Information
User Name
Corporate Name
Time Zone
Keyboard Layout
Corporate Name
(GMT) Greenwich Mean Time:Du
User Default
Back Next Help