User's Guide

1. Installing Internal Optional Devices
Express5800/GT110e-S Users Guide
82
Chapter 2 Preparations
2.5-inch Hard Disk Drive model/liquid cooling system
Model name
Product
name
PCI EXPRESS 2.0
Remarks
PCI#1 PCI#2
PCI slot performance
*1
X4lane X4lane
Slot size Low Profile
PCI card type
*1
X8
socket
x8
socket
Available card size Up to167.6 mm (MD2)
N8103-128 RAID Controller (128 MB, RAID 0/1)
(Card performance: PCI EXPRESS 2.0 (x8))
Connects with internal drives
Can mount internal battery N8103-141 (450
mm cable)
N8103-149
RAID Controller (512MB, RAID 0/1)
(Card performance: PCI EXPRESS 2.0(x8))
Connects with internal drives
Can mount internal battery N8103-155.
N8103-150
RAID Controller (512MB, RAID 0/1/5/6)
(Card performance: PCI EXPRESS 2.0(x8))
N8103-151
RAID Controller (1GB, RAID 0/1/5/6)
(Card performance: PCI EXPRESS 2.0(x8))
N8104-138
1000BASE-T connection board (1ch)
(Card performance: PCI EXPRESS(x1))
For adding LAN
Teaming (AFT/SFT/ALB
) and bonding with
N8104-132/133/138 and on-
board LAN is
supported. Up to 2 teams per system. Up to
2 ports per team.
N8104-132
1000BASE-T connection board (2ch)
(Card performance: PCI EXPRESS(x1))
N8104-133
1000BASE-T connection board (4ch)
(Card performance: PCI EXPRESS(x2))
Can be installed Cannot be installed
*1 Lane: Indicates the transfer performance (transfer bandwidth).
<e.g.> 1 lane = 2.5 Gbps (unidirectional), 4 lanes = 10 Gbps (unidirectional)
Socket: Indicates the connector size. A card up to the number of sockets can be connected.
<e.g.> x4socket = x1card, x4card can be installed. x8 card cannot be installed.
*2 The N8117-01A expansion RS-232C connector kit contains two types of cables. This server uses the RS-232C cable (B).
The depth of mountable boards is up to 167.6 mm (MD2).
For details of functions of each card, refer to the technical guide.
The card performance described in the parentheses after the Product name indicates the maximum operation performance
of the card.
Even if you use PCI cards of a higher performance than the PCI slot, the operation of the device will be that of the PCI slot.
About the standard network
You can use functional equivalents of AFT/SFT/ALB teaming and bonding with the standard network and the
following LAN cards:
N8104-132, N8104-133, N8104-138