User's Guide

3. Standard Features
Express5800/GT110e-S User’s Guide
28
Chapter 1 General Description
3.
Standard Features
The server has the following standard features:
High performance
• Intel
®
Xeon
®
/Pentium
®
processor
• High-speed memory access (DDR3 1600 supported)*1
• High-speed disk access (SATA2 6 Gbps, SAS 6 Gbps supported) *2
• High-speed 1000BASE-T/100BASE-TX/10BASE-T (2 ports) interface
(1 Gbps/100 Mbps/10 Mbps supported)
High reliability
• Memory monitoring feature (error correction/error detection)
• Memory degeneracy feature (logical isolation of a failed device)
• Bus parity error detection
• Temperature detection
• Error detection
• Internal fan monitoring feature
• Internal voltage monitoring feature
• RAID System (Disk Array) (also available as an option)
• BIOS password feature
Management utilities
• NEC ESMPRO
• ExpressUpdate
• Remote controlling featuer (EXPRESSSCOPE Engine 3)
• RAID System management utility (Universal RAID Utility)
• Hard disk drive monitoring
Power saving and noiseless design
• Power monitoring feature
• Power control feature
• High-efficiency power supply supporting 80 PLUS
®
Silver
• Fan control appropriate to environment, work load, and configuration
• Enhanced Intel SpeedStep
®
Technology supported
Expandability
• Many IO option slots
− PCI Express 3.0 (x 16 lanes) *3: 1 slot
− PCI Express 2.0 (x 4 lanes): 2 slots
− PCI (32 bits/33 MHz) *4: 1 slot
* For water-cooled models, 1 slot of PCI Express 2.0 (4 lanes) and PCI (32 bits/33 MHz) slot cannot be
used.
• Large memory of up to 32 GB
• Backup device bay provided as standard
• USB2.0 interface
• Three LAN ports (one for management LAN)
Ready to use
• Hard disk drives can be installed with one-touch setup, which requires no cables (hot swap supported)