User's Guide

1. Installing Internal Optional Devices
Express5800/GT110e-S User’s Guide
100
Chapter 2 Preparations
1.14.1
Installation
Install a backup device by using the following procedure. The procedure will be described, focusing on
installing the USB file device option.
1. Refer to Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. Remove the side cover and front bezel while referring to Chapter 2 (1.4 Removing the Side Cover and
1.5 Removing the Front Bezel).
3. While pressing the tab on the right, pull the dummy
cover out.
4. Remove the four screws from the dummy cover and
detach the rails.
5. Attach the rails to the backup device.
Important • Keep the removed dummy cover for future use.
•
Use screw set 502 supplied with this server to attach the rails to the backup
device.