Maintenance Manual

4. RAID System Configuration
Express5800/GT110e-S Maintenance Guide
98
Chapter 2 Convenient Features
4.5
WebBIOS and Universal RAID Utility

As a utility to configure, manage, and monitor the RAID System after the operating system starts, Universal
RAID Utility is available. The points to be noted when using the Universal RAID Utility together with the
WebBIOS are described below.
(1) Terms

Some terms are different between the WebBIOS and Universal RAID Utility. When using the Universal RAID
Utility together with the WebBIOS, replace the terms as shown in the table below:
Terms of WebBIOS
Terms of Universal RAID Utility
RAID Viewer raidcmd
Adapter RAID Controller RAID Controller
Virtual drive Logical Drive Logical Drive
Drive group Disk Array Disk Array
Drive Physical Device Physical Device
Tips
raidcmd is a command provided by the Universal RAID Utility. For details, refer
to "Universal RAID Utility User’s Guide".
(2) Management numbers

The numbers indicating RAID Controller information differ between the WebBIOS and Universal RAID Utility
as shown in the table below.
For details about the differences in management numbers, refer to "Universal RAID Utility User’s Guide".
Item Management Number
WebBIOS Universal RAID Utility
Adapter (RAID Controller) Starts from 0 Starts from 1
Virtual drive (Logical Drive) Starts from 0 Starts from 1
Drive group (Disk Array) Starts from 0 Starts from 1
Drive (Physical Device) Starts from 0
To be assigned based
on an enclosure that
contains the physical
device and its slot
number.