Maintenance Manual

4. RAID System Configuration

Express5800/GT110e-S Maintenance Guide

Chapter 2 Convenient Features

7. Press the <Esc> key to return to the TOP menu screen, and then exit the LSI Software RAID

Configuration Utility.

Note

• To cancel the hot spare setting, select Objects and then Physical Drive from

the TOP menu. Next, move the cursor to the Hard Disk Drive to cancel the hot

spare setting, press the <Enter> key, and then select Change Drv State.

• If two or more Hard Disk Drives (with the same capacity) are assigned as a hot

spare drive, rebuilding is executed from the drive that has a smaller port number.

ONLINE A00-00

ONLINE A00-01

PORT #

Objects – PHYSICAL DRIVES SELECTION MENU

HOTSP