Maintenance Manual

4. RAID System Configuration
Express5800/GT110e-S Maintenance Guide
88
Chapter 2 Convenient Features
5. Press the <F10> key to specify Select Configurable Array(s), and then press the space key.
SPAN-1 is set.
6. Press the <F10> key to create a virtual drive.
The Virtual Drive(s) Configured screen is displayed. The following screen shows an example of RAID1
consisting of two Hard Disk Drives. On this screen, xxx.xxxGB indicates the capacity.
Units = MB
Size = xxxxxxMB
DWC = Off
RA = On
Accept
SPAN = NO
RAID = 1
Virtual Drive 0
Virtual Drive(s) Configured
VD RAID Size #Stripes StripeSz Status
0 1 xxx.xxxGB 2 64 KB ONLINE
SPAN-1
A-0
Select Configurable Array(s)