Maintenance Manual

1. System BIOS
Express5800/GT110e-S Maintenance Guide
78
Chapter 2 Convenient Features
1.2.6
Save & Exit
If you move the cursor to Save & Exit, the Save & Exit menu appears.
The options of this menu are described below.
(a) Save Changes and Exit
The SETUP utility closes with all the changes saved in NVRAM (Non-volatile RAM). After the SETUP
utility closes, the system automatically reboots.
(b) Discard Changes and Exit
The SETUP utility closes without saving the changes and returns to the previous BIOS settings.
After the SETUP utility closes, the system automatically reboots.
(c) Save Changes
Changes are saved in NVRAM.
(d) Discard Changes
The changes will be discarded and the values are reset to the previously set values.
(e) Load Setup Defaults
This option resets all values in the SETUP utility to the default settings.
Note
The factory settings and default values may differ depending on the model. The
settings must be corrected according to your environment by referring to the list of
settings in this section.